Local Reviews
for Pataskala, OH
Powered by Nearby Nowno equal service + great price
Bruce - Pataskala, OH
Great service and information
Saunders - Pataskala, OH
Very polite and informative.
Wonderful service! Saved the day!
Erika - Pataskala, OH
Noah was polite and fixed our AC unit.
Very Professional!
Lynn - Pataskala, OH
We have used Canal Winchester Heating & Cooling for many years! Very fast service & problems fixed at a reasonable price. Very knowledgeable and professional repairmen.
Cory C.
119280
Tony C.
119259
Tony C.
I found that the strap holding the flue had come undone and caused the pipe to drop down sending water back into the inducer. I drained the water then reinstalled the inducer and fixed the strap on the flue. The Carrier 96% 60,000 BTU Gas Furnace is running at this time.
Tony C.
I found that the water leakage was from the water softener, not the furnace. I tuned the water off to the softener and helped customer turn on valve to water softener and fix water issues. All good at this time.
Tony C.
During a tune up on a Carrier 96% 60,000 BTU Gas Furnace, I cleaned the trap out and checked for blockage in the drain line. I also checked all wiring and pipes for obstruction. All readings are within manufactures specifications at this time.
Tony C.
Upon arrival, I found the 2013 Goodman gas furnace flashing code E2, indicating a pressure switch issue. I restarted the furnace and found inducer not spinning. I recommend that customer have inducer replaced in order for us to further diagnose the issue.
Tony C.
I performed a tune up on a Bryant gas furnace. During the tune up, I found the blower capacitor was failing. I informed the customer and they did not want to replace at this time. Customer did ask for a quote on a new humidistat. Will send one over. System is operational upon departure.
Scott G.
Upon arrival, I found the 2013 Goodman gas furnace flashing code E2, indicating a pressure switch issue. I restarted the furnace and found inducer not spinning. I recommend that customer have inducer replaced in order for us to further diagnose the issue.
Scott G.
During a tune up on a 2010 ICP gas furnace, I found the filter is dirty which caused the system to overheat. Customer will replace filter. All other numbers are within range and unit is operating as expected.
Cory C.
I found indoor head blower wheel covered in mold and I recommend iWave air purifier. There are no wires attached from terminal to ground. Compressor replacements on mini-splits are risky, I recommend replacement instead.
