Local Reviews
for Westerville, OH
Powered by Nearby NowGreat Service
Linda - Westerville, OH
Had our air conditioner serviced for the season. Service rep was on time, efficient and answered all of questions, plus gave us tips on caring for our unit.
Furnace Check-up
Linda - Westerville, OH
Rep was on time, efficient, answered our questions. No problems, so nothing to do on this scheduled service check.
Haidar H.
120162
Haidar H.
119290
Haidar H.
I completed a diagnostic on a DBP Air Conditioner. I determined that due to age and cost of repairs it would be better to install a new air conditioner.
Haidar H.
I found that the bearings are loud and the flame sensor needs cleaned. The system is overheating and shutting off due to restrictive filter. I told client to change once a month. I cleaned flame sensor, the York furnace heating at this time.
Haidar H.
I performed a diagnostic on Bryant gas furnace. I found that the inducer motor wouldn't turn so I loosened it. Everything was fully operational upon my departure.
Tony C.
I completed a cleaning on the blower wheel and housing, the evaporator coil, and the filter rack inside the return air drop. I also completed an A/C and furnace tune up. Systems functioning upon depart.
Cory C.
I completed a tune up on a Carrier gas furnace. I informed customer that the inducer motor bearings were starting to go bad and will need replaced in the near future, also recommended a replacement ignitor as well. Customer declined to repair the issues at this time. Replaced 2 thermostats in the home, a Honeywell T10 and a smart thermostat for the attic.
Cory C.
During a tune up on a Carrier up to 17 SEER 2 STAGE 3 Ton Air Conditioner, I found a leak at the liquid service valve. Office is ordering part to replace. All other readings are within manufacturers specifications at this time.
Cory C.
During a tune up on a Trane gas furnace, I found that the wiring and connections are secure. The burners are rusted but not restricted. I cleaned the flame sensor. Advised customer that humidifier pad needs replaced. All readings are within manufacturers specifications at this time.
Cory C.
I found that the inducer motor is making a grinding sound but is still operating within manufacturers specifications. The inducer gets hot and makes squealing noise, I recommend replacing. Customer would like to hold off on repair to Payne gas furnace at this time.
